FF-C1x
緊湊型氣體質量流量控制器
- 快速穩定控制
- 集成氣體轉換模塊
- 22種氣體嵌入
- 多參數輸出:質量流量、溫度和壓力
- USB-C和藍牙通信
- Namur NE107狀態指示
緊湊型氣體質量流量控制器
FLEXI-FLOW 緊湊型質量流量控制器適用于工作壓力在真空和17 bar(a)條件下準確測量0…500 mln/min 和 0…20 ln/min之間的流量。儀表結合基于毛細管MEMS技術快速穩定的熱式質量流量傳感器和可靠準確的旁路結構?;?strong>TCS技術,建立準確的質量流量測量,不受溫度和管路壓力變化影響。與集成溫度和上下游壓力傳感器相結合,22種氣體的嵌入式數據庫實現精準集成轉換。多參數儀表可提供過程信息。
FLEXI-FLOW緊湊型質量流量控制器目前可選:
Measurement / control system | |
---|---|
Flow range (intermediate ranges available) | min. 0…500 mln/min max. 0…20 ln/min (based on N2) |
Pressure ranges | PA: 0…17 bar(a) PS: not available BtO: FF-C10: not available / FF-C11: 0…17 bar(a) |
Accuracy (incl. linearity) (based on actual calibration) | PA: ±0,8% Rd plus ±0,2% FS (N2/Air/O2); PS: ±1,5% Rd plus ±0,5% FS (N2/Air/O2); BtO: Up to ±0,5% Rd plus ±0,1% FS (N2/Air/O2); for other gases add conversion uncertainty; see?multi gas table; |
Repeatability | Flow sensor: < ±0,2% Rd; Pressure sensors: < ±0,2% FS |
Turndown ratio | PS: 1:50 PA: 1:500 BtO: up to 1:1000 |
Max. operating pressure | 16?bar g |
Multi Gas/Multi Range | embedded gas data for?22 unique gases?plus any mixture of these gases |
Settling time (in control, typical) | <?150 ms |
Long term stability | < 0,5% FS over period of 3 years; then < 0,2% FS per year |
Control stability | < ±?0,1% FS (typical for 1 ln/min N2) |
Operating temperature | 0…50?°C |
Mounting | any position, attitude sensitivity negligible |
Temperature sensitivity | Flow sensor: zero 0,0015% FS/oC; span 0,03% Rd/oC; Pressure sensors: zero 0,16 mbar/oC; span 0,05% Rd/oC |
Temperature accuracy | ± 0,2 oC (instrument body temperature) |
Accuracy pressure sensors | ±0,5% FS |
Pressure sensitivity | standard: < 0,15% Rd/bar typical N2; with pressure correction: < 0,02% Rd typical N2 |
Leak integrity, outboard | tested < 2 x 10-9?mbar l/s He |
Leak-by through closed valve | typical < 1 x 10-4?mbar·l/s He |
Mechanical parts | |
---|---|
Material (wetted parts) | aluminium, stainless steel, silicon nitride, epoxy, aluminium oxide, glass |
Surface quality | <?1,6 mu Ra (<0,8 mu Ra for stainless steel body) |
Pressure rating (PN) | 16 bar(g) / 250 psig |
Max. ΔP | 16 bar(d); 20 ln/min models: 5 bar (d) |
Process connections | BtO: compression type, push-in or face seal couplings; PS / PA: to be ordered separately |
Seals | FKM 51415; valve seat: FFKM with PI film BtO option: for other materials contact factory |
Weight | 200 g with Aluminium body, 300 g with SS 316 body |
Ingress protection | IP40 |
Instrument body | BtO: Aluminium or Stainless steel (selectable); PS / PA: Aluminium |
Electrical properties | |
---|---|
Power supply | 24 Vdc ± 10% |
Max. power consumption | 2,0 Watt |
Digital communication | Modbus RTU or FLOW-BUS (selectable) |
Support interface | USB-C port for easy setup; Optional Bluetooth connection for monitoring |
Electrical connection | 9-pin D-sub (male) |
Electrical connection | |
---|---|
CE | EMC 2014/30/EU, RED 2014/53/EU, RoHS 2011/65/EU |
技術參數如有變更,恕不另行通知。
更多資料
樣冊 | |
---|---|
FLEXI-FLOW brochure |
說明書 | |
---|---|
Quick installation guide FLEXI-FLOW | |
快速安裝指南 FLEXI-FLOW | |
使用說明書 FLEXI-FLOW |
安裝圖 | |
---|---|
FLEXI-FLOW Compact Modbus-RTU / FLOW-BUS |
尺寸圖 | |
---|---|
Dimensions FLEXI-FLOW Compact MFC-MFM |